|
|
Outdoor AP
Client, Repeater, Bridge,
| APE-2408G
| | 2.4GHz, 802.11b/g, 800mW/29dBm, Enhanced
Outdoor AP/client/Repeater/Bridge
|  |  | | APE-2408gN (N connector no antenna) | APE-2408G (built-in antenna) | | | Feature Highlights | - 800mW/29dBm, 802.11g/b, up to 25Km
- Support Multi-SSID and VLAN function in AP mode
- Enhance user performance and density QoS(WMM) support
- WPA2/WPA/802.1X
- 8 + 32MB memory
| | | AP Specification | Standards Compliance
| IEEE 802.11b
IEEE 802.11g
IEEE 802.3
IEEE 802.3u
IEEE 802.3af | SDRAM
| 32 M Byte | Flash
| 8 M Byte | Radio Frequency Type
| DSSS / OFDM | Modulation
| IEEE 802.11b: CCK,DQPSK,DBPSK
IEEE 802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM | | Frequency Band | America/FCC: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI: 2.412~2.472 GHz (13 channels) | Transmission Power
| IEEE 802.11b: 29 dBm@1~11Mbps
IEEE 802.11g: 22 dBm@54Mbps; 23dBm@48Mbps; 25dBm@36Mbps; 26dBm@6~24Mbps | | Transmission Rate | IEEE 802.11b: 1/ 2/ 5.5/ 11Mbps
IEEE 802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps | | Access Point Interfaces | Auto MDI/MDI-X Ethernet 10/100Base-TX: RJ-45 | | Sensitivity | IEEE 802.11b: -98dBm @ 1Mbps; -93dBm @ 11Mbps, PER < 8%
IEEE 802.11g: -95dBm @ 6Mbps; -75dBm @ 54Mbps, PER < 10% | | Antenna Type | Integrated 15dBi flat panel antenna or external high gain antenna | | Security Systems | 64-bit/128-bit/152-bit WEP encryption;
Wi-Fi Protected Access (WPA)/ WPA2 | | Wireless Setting | AP/ Client / Wireless Bridge (WDS) PtP and PtMP (up to 16 links)/ Repeater
Channel Selection (Setting varies by Country)
Adjustable transmit power by 1dBm step | | Software/Firmware | Site Survey
DHCP Client
Suppressed SSID
Spanning Tree settings
Wireless access control by MAC address filter (up to 50)
Multiple SSID with 802.1q VLAN tagging (up to 4 SSIDs)
Web-based configuration via popular browser (MS IE, Netscape…)
Windows “Locator” program to help find IP in DHCP client mode
Firmware upgrade and configuration backup via Web
Reset to default by WebUI
VPN pass-through (PPTP, L2TP, IPSEC)
SysLog
SNMP v1/v2c
MIB support: MIB I, MIB II (RFC-1213) and Private MIB
Support QoS(WMM)
Support Time settings | | Operating Environment | Operating Temperature: -20 ~ +70°C | | Power | DC 48 Volt ± 5%; 0.4A (Max.); ACadapter AC 100V ~ 240V | | Regulatory Approval | CE/FCC, RoHS | Network Management
System OS Support
| Windows 2000/XP | | Warranty | One year limited | | | Outdoor AP/client/Repeater/Bridge | | | | Outdoor AP/client/Repeater/Bridge |
|
|
