PA-2410G
2.4GHz, 1-watt Bi-directional Amplifier

	PA-2410G 2.4GHz,1-watt Bi-directional Amplifier for WLAN (802.11g)
	1 Watt 802.11g Amplifier
	Featuresand Advantages 802.11g compliance Immediate, low-cost, easy solution for magnifying the limited RF outputpower of the existing AP or Bridge device to 1 Watt (29dBm). TX/RXLEDs Indication. Autogain adjustment (AGC) Outdoorweather proof. DCpower feed through RF cable (POE design)
	Specifications Outputpower 29dBm(+/- 1 dBm) FrequencyRange 2400~2500Mhz Standard 802.11g Operatingmode Bi-directional TDD TransmitGain Up to 12dB ReceiverGain 12~15dB, 12 dB typical TX InputPower 5dB (min)/20dB (max) NoiseFigure 3.5 dB typical FrequencyResponse +/- 1 dB Connectors N-type, 50 Ohm PowerConsumption TX: <1A / RX: 160mA @ 9 VDC LighteningProtection Quarter Wave Technology LEDIndication Transmit: Green / Receive: Red OperatingTemperature -30 C ~ + 70 C Dimension 110x60x31mm Weight 1.2Kg/set
	POE(Power over Ethernet) Design True Outdoor unit, weather-proof, operating under–30C ~ 70C Least gain loss of antennas, highest transmissionefficiency POE (Power over Ethernet) design, best performancewith most stability